TN3008 Stroller Raise and Lower Durability Tester
Child Conveyances Handle Strength Tester
INTRODUCTION
Used for testing handle durability and strength through raising and lowering the handle of the chile conveyances.
Two fixtures on handle can move in vertical and horizontal directions independently and such adjust the width to accommodate different types and sizes of products.
TEST PRINCIPLE
Position relevant test mass in the pram body.
Alternately raise and lower the handle(s) by applying a vertical force to the handle so that the rear wheels and front wheels in turn are raised (120 ± 10) mm, measured at the start of the test from the floor and then lowered in a controlled manner without pause .
Carry out the test for a total of 10 000 cycles at a frequency of (15 ± 2) cycles/min.
FEATURES AND BENIFITS
1.Control mode : PLC
2.Display mode : Touch screen display
3.Can preset test times, cycle test, time interval, etc
4.Display datas : speed, the number of times
5.Fixed clamps on handle : movable and replaceable type
6.Mode of action: pneumatic and automatic
7.Multiple grating protection to avoid injury
8.Power is automatically saved, can preset stop or continue to work
9.Other functions: automatically judging specimen damaged, automatic stop
TECHNICAL PARAMETERS
1.Vertical stroke of fixtures : 0~500 mm (adjustable)
2.Horizontal stroke of fixtures : about 300 mm
3.Test space of lift and down : 100~200 mm (adjustable), comply with all standard test requirements, control accuracy of ±4 mm
4.Test frequency : (15 ± 2) cycles/min
5.Maximum bearing load : 50 lbs
6.Counting range : 0 ~999 999
7.Air supply : 7 kg/cm2 (user provides)
8.Power supply : AC 220 V,50Hz,400 W
9.Dimension : 165×110×190 cm
10.Weight : 250 kg
STANDARDS
GB 14748,EN 1888-1,etc.
|
Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc
NEW TOTAL SOLUTIONS
HONOR AND CERTIFICATES
STANDARD PACKING
MULTIPLE TRANSPORTATION
|
|
|
TN1838 Blankets Flammability Tester
INTRODUCTION
To test blanket fabric flame retardant performance and fabric surface flame spread performance,
the test method is within the stipulated time, to standardize the flame was carried out on the
sample surface combustion, the combustion of standard test paper, to look at the degree of
damage or discoloration, and fabric for grading evaluation of the test.
TECHNICAL PARAMETERS
1.Test chamber : 37×22×35 cm, 12 ventilation holes of φ12.7 mm in the top
2.Standard flame height : 16 mm, adjustable,No.18 hypodermic needle
3.Ignition time : can be set freely, standard requirement of 1 s
4.Timing accuracy : 0.1 s
5.Flow meter range : 0~60 ml/min
6.Specimen size : 70 mm×70 mm
7.Specimen holder size : inner diameter of 63.5 mm
8.Dimension : 42×26×52 cm (L×W×H)
9.Weight : 20 kg
10.Power supply : AC220V,50/60 Hz, 3 A
STANDARDS
ASTM D4151
Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc
NEW TOTAL SOLUTIONS
HONOR AND CERTIFICATES
STANDARD PACKING
MULTIPLE TRANSPORTATION
|
|
