TN1928-E Seat Flammability Test Rig (EU Standards)
INTRODUCTION
For determining the ignitability of material combinations for seating.
The test rigs are covered with the standard foam and the fabric under test.
The assembly is then ignited using one of the standard ignition sources and the combustion process is monitored.
Flame height can be adjusted.
TECHNICAL PARAMETERS
1.Standard combustion tube specification : outer diameter of (8± 0.1)mm, inner diameter of (6.5± 0.1) mm, length of (200±5) mm
2.Standard flexible tube specification : (7±1)mm in inner diameter,2.5~3.0 meters in length
3.Gas flow rate adjustment range : 40~400 ml /min
4.Timing accuracy : ±0.1 s
5.Weight : 15 kg
6.Dimension : 45×30×45 cm
STANDARDS
BS 5852 section 1,2,BS EN 1021-1,EN 1021-2,ISO 8191 section 1,2,GB 17927
Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc
NEW TOTAL SOLUTIONS
HONOR AND CERTIFICATES
STANDARD PACKING
MULTIPLE TRANSPORTATION