• Fabric Bursting Strength Tester JIS L1018, ISO 13938.1
  • Fabric Bursting Strength Tester JIS L1018, ISO 13938.1
  • Fabric Bursting Strength Tester JIS L1018, ISO 13938.1
  • Fabric Bursting Strength Tester JIS L1018, ISO 13938.1

Fabric Bursting Strength Tester JIS L1018, ISO 13938.1

Model No.︰

TN11248-HM-P

Brand Name︰

TONNY

Country of Origin︰

China

Unit Price︰

US $ 8000 / set

Minimum Order︰

1 set

Share on:

Product Description

TN11248-HM-P   Fabric Bursting Strength Tester (Hydraulic method)

 

INTRODUCTION

To determine the bursting strength of membrane of fabric ,non-woven fabrics etc,the hydraulic pressure is applied to the specific area of the rubber film, and then forcing the fabric to bursting,when these materials are under force in all directions at the same time(elastic diaphragm method).
Equipped with pressure display ,peak hold records and peak upper limit set, replaceable the rubber diaphragm, pneumatic clamping device . 

FUNCTIONS AND BENEFITS
1. Large color touch screen display, the interface is simple and easy to understand, simple and intuitive, and sensitive to touch.

2. Pneumatic clamping, uniform clamping, not easy to slip and break the jaws, easy to use.

3. The test cover made of high transparent plexiglass material, magnet suction design, more convenient to replace and disassemble.

4. Built-in LED light can clearly observe the test process.

5. AC servo drive system, low operating noise, wide debugging range, wide application range.

6. High speed AD processor, accurate test, high precision.

7. Serial port printing function, baud rate 19200.

TECHNICAL PARAMETERS
1.Test range : 0~2 MPa (20 kg)
2.Resolution : 0.002 MPa

3.Accuracy : ≤0.2% F.S
4.Test area : φ79.8 mm(50 cm2) and φ30.5 mm(7.3 cm2 ) ; φ35.7 mm10 cm2,φ112.8 mm100 cm2,customrized
5.Elastic diaphragm size : φ140 mm, thickness in 2 mm or less
6.Maximum distension : 70±0.02 mm

7.Distension accuracy : ≤0.2% F.S
8.Maximum bursting time : 99.9±0.1 s  
9.Pressure and oil absorption rate: 10~800 ml/min

10.Pneumatic compaction force : 10000 N

11.Force accuracy : ≤0.2% F.S
12.Power supply : AC 220V,  50 Hz, 500 W    
13.Dimension : 70×50×85 cm
14.Weight : 100 kg

STANDARDS

ISO 13938.1, ISO 2960,ASTM D3786,JIS L1018,GB/T 7742.1,FZ/T 60019,etc

 

Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc

 

NEW TOTAL SOLUTIONS

 

Lab new solutions

 

HONOR AND CERTIFICATES

 

image

 

image

STANDARD PACKING

STANDARD PACKING

 

MULTIPLE TRANSPORTATION

 

Shipping

 

 

 



Payment Terms︰ T/T

Product Image